logo
Enviar mensaje
productos
En casa / Productos / Adaptadores ópticos /

Converter 100G CFP2 TO QSFP28 Adapter Module Four Channel Hot Pluggable

Converter 100G CFP2 TO QSFP28 Adapter Module Four Channel Hot Pluggable

Nombre De La Marca: Optowix
Número De Modelo: Adaptador 100G CFP2 a QSFP28
Cuota De Producción: 10 por ciento
Condiciones De Pago: T/T
Capacidad De Suministro: 10Kpcs
Información detallada
Lugar de origen:
Porcelana
OPTOWIX PN:
Se aplicará el procedimiento siguiente:
Nombre del producto:
Adaptador 100G CFP2 a QSFP28
Estándares:
Protocolo patentado y aplicación de densidad
Características:
Conforme a las especificaciones de hardware CFP2 versión 1.0
Detalles de empaquetado:
Caja de plástico de ESD
Capacidad de la fuente:
10Kpcs
Resaltar:

100G CFP2 to QSFP28 adapter

,

hot-pluggable optical adapter module

,

four-channel CFP2 converter module

Descripción del producto
Converter 100G CFP2 TO QSFP28 Adapter Module Four Channel Hot Pluggable
Product Attributes
Attribute Value
Optowix PN MW1Q-LR00
Product Name 100G CFP2 to QSFP28 Adapter
Standards Proprietary protocol and density application
Features Compliant to CFP2 Hardware Specification Version 1.0
Converter CFP2 To QSFP28 Optical Adapter Module
Features
  • Compliant to CFP2 Hardware Specification Version 1.0
  • Compliant to CFP2 MSA Management Interface Specification Version 2.4
  • 4 channels full-duplex transceiver
  • Internal CDR circuits on both receiver and transmitter channels
  • Transmission data rate up to 28Gbps per channel
  • OTU4 compatible
  • Without FEC (Forward Error Correction)
  • 1 port QSFP28 TX&RX, supports 100G QSFP28 LR4/ER4. Supports 100G QSFP28 SR4/PSM4/CWDM4/CLR4 (when the 100GE network equipment's CFP2 port has FEC function)
  • MDIO digital diagnostic interface(Optional) and control capabilities
  • Power class 3 (Adapter<2W max)
  • Hot pluggable electrical interface
  • Operating case temperature:0°C~ +70°C
  • Single 3.3V power supply
Standards
  • 100GBE interconnects, IEEE 802.3ba 100GBASE-LR4(Adapter+QSFP28_LR4)
  • High-speed core router connections & Datacom/Telecom switch
  • Data aggregation and backplane applications
  • Proprietary protocol and density application
Ordering Information
Part Number Product Description
MW1Q-LR00 100G CFP2 to QSFP28 Adapter, 0ºC ~ 70ºC
Description

The 100G CFP2 to QSFP28 Adapter module is a four-Channel, high performance, hot pluggable, and interconnect solution supporting 100G Ethernet and Telecom. The adapter converts a CFP MSA interface to 1-port of 100GE QSFP28.It is compliant with the CFP MSA. 100G CFP2 to QSFP28 Adapter integrates four data lanes in each direction with operating at up to 28Gbps per lane. The adapter without the FEC (Forward Error Correction) and supports 100G QSFP28 LR4/ER4. When the 100GE network equipment's CFP2 port has FEC function, it can support 100G QSFP28 SR4/PSM4/CWDM4/CLR4.

Recommended Operating Conditions
Parameter Symbol Min Typ Max Unit Note
Operating Case Temperature Top 0 70 °C
Power Supply Voltage VCC 3.13 3.3 3.47 V
Data Rate Per Lane fd - 25.78125 27.952 Gbps
Power Dissipation Pm 2 W
Low Power Mode Dissipation Plow 2 W
Aggregate Bit Rate BRaggr 103.125 111.8 Gbps
Absolute Maximum Ratings
Parameter Symbol Min Typ Max Unit
Storage Temperature Range Ts -20 85 °C
Maximum Supply Voltage VCC -0.5 3.6 V
Input Voltage Vin -0.3 Vcc+0.3 V
Relative Humidity Rh 5 85 %

Note: Exceeding any one of these values may destroy the device immediately